1/2 Inch Printable Heat Set Lanyard Polyester Webbing

$6.97
In stock
Only %1 left
SKU
WPELP-WHI-1.2

Key Features:

  • 1/2 INCH WIDTH | Smooth weave perfect for photo-quality sublimation
  • STRONG AND DURABLE | With a tensile strength of 256 lbs, it holds up well for your projects. Approximately 0.024 inch or 0.62mm thick.
  • FUNCTIONAL | Soft to the touch, this polyester webbing is easy to work with and flexible. Versatile enough to be used for a wide array of applications.
  • CUSTOM DESIGN | Have a custom design that you would like sublimated? Our sublimation services can run jobs of 50 yards or more.
  • QUESTIONS? | Our friendly customer service team is here to help! Please contact us with any questions you may have about our products.

No matter what project you have up your sleeve, chances are polyester webbing will be the right fit for you. Made from 100% polyester fibers, this webbing has a stunningly smooth finish which is excellent for crisp, photo-quality sublimation! This webbing has a high tensile strength and can be used for virtually any project.

In addition, this webbing has already been heat set, which reduces shrinkage and ghosting.

Have a custom design that you would like sublimated? Our sublimation services can run jobs of 50 yards or more. Feel free to contact our customer service department for a free no obligation quote.

For this webbing, it is best to use 1/2 inch hardware; such as D-rings, buckles, or triglides. Please note that rolls may contain factory splices. If you need a continuous roll, please let us know.

Tensile strength is the average breaking point under good conditions at the factory. We recommend that you use no more than 25% of the tensile strength of any webbing.

Country Brook Design cannot be held responsible for misuse of our product. It is the responsibility of the purchaser to determine the suitability of the product for their use.

DISCLAIMER: This printable polyester webbing is the same we use for our sublimated products. Although we always have success sublimating on this webbing, we can not guarantee sublimation results based on the many different processes that are available. Your printer, ink, paper, temperature, pressure, and sublimation time can all affect the outcome.

In addition, this webbing has already been heat set, which reduces shrinkage and ghosting.

Have a custom design that you would like sublimated? Our sublimation services can run jobs of 50 yards or more. Feel free to contact our customer service department for a free no obligation quote.

For this webbing, it is best to use 1/2 inch hardware; such as D-rings, buckles, or triglides. Please note that rolls may contain factory splices. If you need a continuous roll, please let us know.

Tensile strength is the average breaking point under good conditions at the factory. We recommend that you use no more than 25% of the tensile strength of any webbing.

Country Brook Design cannot be held responsible for misuse of our product. It is the responsibility of the purchaser to determine the suitability of the product for their use.

DISCLAIMER: This printable polyester webbing is the same we use for our sublimated products. Although we always have success sublimating on this webbing, we can not guarantee sublimation results based on the many different processes that are available. Your printer, ink, paper, temperature, pressure, and sublimation time can all affect the outcome.

Write Your Own Review
You're reviewing:1/2 Inch Printable Heat Set Lanyard Polyester Webbing
Your Rating
© 2024 Country Brook Design. All Rights Reserved.